The USB A/B Cable Bundle is designed to offer the fundamental cables and passthrough you need to build a DIY Fightstick that utilizes a Brook Fighting Board PCB, or PCB with a similar form factor, with USB-B output.
What's Included?
Here's what's included with the American Wiring Bundle:
- 1 x 10 Foot Male A-B USB 2.0 Cable
This black USB 2.0 cable measures 10 feet (3.04m) and uses an A-B interface compatible with most Neutrik adapter-based interfaces. This attaches to the Neutrik passthrough when the passthrough's interface is reversed from the factory setting (USB A In, USB B Out) - 1x 18 Inch Male A-B USB 2.0 Cable
This compact 1foot-6 inch male AB USB 2.0 able serves as a forwarding cable from your Brook Fighting Board PCB to the Neutrik adapter's USB B input. - 1 x Neutrik NAUSB-W-B A/B USB Feed-Through - Black
The A/B adapter allows you to put a USB port outside of your case, attaching a USB cord to the console through one side, and a USB forwarding cable to your main PCB. The USB "A" and USB "B" sides are reversible, allowing the forwarding cable to input to the A side of the passthrough, and output on the B side. With every Neutrik NAUSB purchase you will receive 4-40 Machine Screw and 4-40 Nut (Set of 2) free of charge.
%%Panel._Note_ReverseNAUSB%%