Hori's Real Arcade Pro series was one of the first arcade style joystick levers to hit the market, providing players with a portable control panel that felt close to the Japanese arcade. Over the years, the HRAP 2, 3 and EX family developed a cult following of sorts. That said, this particular model was not designed for customization, with its difficult to reach screws that required opening the case from the bottom.
Now you can purchase a set of 6 "top loaders". which upon install, allow you to screw and unscrew your plexiglass panel from the top. This removes the need to access the screws from bottom, and simplifies swapping custom artwork and plexi.
Compatible with Hori Real Arcade Pro 2/3/EX Models
The Top Loader will install into the following models. Links to model artwork and plexi customization templates are listed below, but are not required for use with the top loader.
%%Panel._Plex_Hori_RAP23EX_Models%%
%%Panel._Plex_Hori_RAP3KAI_Models%%
3M 300LSE Adhesive
Atop each top loader is 3M 300LSE double-sided adhesive. Commonly used to adhere phone screens, 300LSE offers an incredibly strong bond once contact is made and pressure applied. The adhesive is installed in house by our staff.
Acrylic Top Loader Handle, Choice of Screws, Hex Key Included
You will receive two acrylic top loader handles. These are placed between the shallow grooves of the top loader, and are designed to grip the loader in place during installation. It can also assist in applying pressure onto the loader when its exposed adhesive makes contact with the plastic surface of your HRAP. Note: There will be a plastic or paper film on each handle, which you can remove before using.
Optionally, you can choose from a set of M4x12MM compatible 2.5mm hex screws in steel and anodized colors, plus 2.5mm Long Arm hex key. Each are free with your purchase of the top loader (Please note these items are free while supplies are available to fulfill the order).
Bundle with Hori RAP 2/3/EX Blank or Custom Plexi and Save
Save $1.00 on the Buttercade HRAP 3 Top Loader with a purchase of a blank or custom etch Hori RAP 2/3/EX or Tekken Kai plexi. Simply add the plexi to your shopping cart, then the HRAP 3 Top Loader.
Installation
%%Panel._Plex_BARCADETL_Notes%%
4 Reviews Hide Reviews Show Reviews
Write a Review
Buttercade
Buttercade Top Loader for Hori Real Arcade Pro
-
Works great for The Sega Virtual Stick High Grade!
I heard about this from someone else, But yes you can use the 3D printed nuts to secure the top panel down. The 4 outer ones on the corner are easy. The middle bottom I had to break some the plastic out of the way to make it fit. And I used the original nut that came with the case and super glued it down on the top Middle screw. You could break some more plastic to make it fit but I wanted to see if this would work first. Definitely easier to open now. I'm using the black anodized hex screws. They blend right in. Unknown on Jul 24th 2024
-
Cool bit with one issue
I like the idea of these and they make getting in and out of any RAP easier. However the 2.5mm hex screws that are sent free with the purchase do not fit. The original bolts fit snug so you will need to source screws that match that size. Unknown on Oct 14th 2022
-
Quality of Life
I have 3 classic Hraps and opening them has always been a hassle. With a few sets of these, I don't have to bother with the bottom plate ever again! Replacing buttons is a snap with the included hex driver, 6 on top, pop and you're basically finished. All my Hraps are now modded with Brook PCBs and I d don't dread having to open them up for maintenance anymore! telesniper on Jun 18th 2020
-
Amazing
Makes it super easy to open and gives it a cool look with the new screws Corey on Nov 23rd 2019